LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Azera >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

  1. Remove the front driveshaft.

    (Refer to "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to "TJ JOINT ")

  3. Using a pillar or flat-tipped(-) screwdriver, remove the both side of clamp (B) of the dynamic damper (A).
    Fig 1: Removing Dynamic Damper Clamp Using Flat-Tipped Screwdriver
    G08810043Courtesy of HYUNDAI MOTOR AMERICA
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft Using Vice
    G08810044Courtesy of HYUNDAI MOTOR AMERICA
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
    Fig 3: Identifying Dynamic Damper And Shaft
    G08810045Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals