LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Genesis Coupe 3.8 Track, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L) >> Engine Control Module (ECM) >> Repair Procedures >> Removal >> A/T
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal: A/T

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM Connector (A).
  3. Disconnect the TCM connector (B).
  4. Remove the ECM bracket installation bolts (C) and nut (D).
    5. Fig 1: Identifying ECM Connector, TCM Connector, ECM Bracket Bolts, & Nut
    G06514126Courtesy of HYUNDAI MOTOR CO.
  5. Remove the ECM from bracket after removing the installation bolts (A).
    Fig 2: Identifying ECM Bracket Bolts
    G00540649Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals