LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Canister Close Valve (CCV) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation tube quick-connector (B) from the fuel tank air filter and canister close valve.
    Fig 1: Canister Close Valve Connector And Ventilation Tube Quick-Connector
    G10234930Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel tank air filter and canister close valve assembly (A) after rotating it as shown in illustration below.
    Fig 2: Canister Close Valve Assembly
    G10234931Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Removing Fuel Tank Air Filter And Canister Close Valve Assembly By Rotating
    G10234932Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 4: Release Lever, Canister Close Valve And Fuel Tank Air Filter
    G10234933Courtesy of HYUNDAI MOTOR AMERICA
    Fig 5: Removing Canister Close Valve From Fuel Tank Air Filter
    G10234934Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals