LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Shift Lever >> Repair procedures >> Removal 2013 >> Control Cable Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Cable Replacement

  1. Remove the center console assembly.

    (Refer to "CONSOLE " .)

  2. Remove the control cable (A).
    Fig 1: Control Cable
    G10243385Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).

    Tightening torque: 

    11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7 ~ 10.9 lb-ft)

    Fig 2: Nuts And Retainer
    G10243386Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the nut (C).

    Tightening torque: 

    9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

  5. Remove the cable (B) from the bracket (A) at transaxle assembly side (Refer to "AUTOMATIC TRANSAXLE " ).
    Fig 3: Transaxle Assembly Side Cable And Bracket
    G10243387Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the control cable inside of cab.
scientia non olet · About LEMON Manuals