October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal 2014

Remove the valve body assembly.
(Refer to "VALVE BODY ")
Disconnect the input & output speed sensor connector (A) from the main wiring.
Remove the input & output speed sensor (B) after removing the bolts (2ea).
Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Input & Output Speed Sensor And Connector
Courtesy of HYUNDAI MOTOR AMERICA