LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Shift Lever >> Repair procedures >> Removal 2013 >> Shift Lever Assembly Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Shift Lever Assembly Replacement

  1. Remove the center console assembly.

    (Refer to "CONSOLE " .)

  2. Disconnect sports mode connector (A).
    Fig 1: Sports Mode Connector
    G10243382Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the control cable (A).
    Fig 2: Control Cable
    G10243383Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the shift lever assembly (A) by removing the bolts.

    Tightening torque: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Fig 3: Shift Lever Assembly
    G10243384Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.
    NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
scientia non olet · About LEMON Manuals