LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Transaxle Oil Temperature Sensor >> Repair procedures >> Removal 2014
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal 2014

  1. Remove the battery and the battery tray.

    (Refer to battery and battery tray in ENGINE AND TRANSAXLE ASSEMBLY )

  2. Remove the under cover (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Under Cover
    G10243313Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the air cleaner assembly and air duct.

    (Refer to air cleaner assembly and air duct in ENGINE AND TRANSAXLE ASSEMBLY )

  4. Remove the valve body.

    (Refer to VALVE BODY )

  5. Disconnect the solenoid valve connector (A).
    Fig 2: Solenoid Valve Connector
    G00559816Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the solenoid valve main connector mounting clip (A) after removing the bolt.
    Fig 3: Solenoid Valve Main Connector Mounting Clip
    G00559817Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the solenoid valve main connector (A).
    Fig 4: solenoid valve main connector
    G00559818Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the input & output speed sensor connector (A) after press the lock from the solenoid valve main wiring.
    Fig 5: Input & Output Speed Sensor Connector
    G00559819Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the solenoid valve main wiring & oil temperature sensor after loosening the main connector bolt (A).
    Fig 6: Solenoid Valve Main Wiring, Oil Temperature Sensor And Main Connector Bolt
    G00559820Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals