LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Disconnect the accelerator control connector (B).
  4. Remove the accelerator pedal in the direction of "Removal direction" in Fig 1 after removing the installation bolt (B).
    Fig 1: Disconnecting Accelerator Control Connector
    G08834190Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Identifying Accelerator Pedal And Sensor
    G08834191Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals