LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Santa Fe GLS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal >> [CVVT Oil Control Valve (Intake)]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[CVVT Oil Control Valve (Intake)]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold.

    (Refer to "INTAKE MANIFOLD ")

  3. Disconnect the CVVT oil control valve connector (A).
  4. Remove the installation bolt (B), and then remove the valve from the engine.

    [Bank 1] 

    Fig 1: Identifying CVVT Oil Control Valve Connector And Mounting Bolt (Bank 1)
    G09270824Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2] 

    Fig 2: Identifying CVVT Oil Control Valve Connector And Mounting Bolt (Bank 2)
    G09270825Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals