LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD ")

  3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening the bolt.

    [USA] 

    Fig 1: Identifying Immobilizer Unit (USA)
    G09135363Courtesy of HYUNDAI MOTOR AMERICA

    [CANADA] 

    Fig 2: Identifying Immobilizer Unit (Canada)
    G09135364Courtesy of HYUNDAI MOTOR AMERICA