LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Elantra Coupe GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to: "INTAKE & EXHAUST SYSTEM " in EM procedure).
  3. Disconnect the ETC module connector (A).
    Fig 1: Disconnecting ETC Module Connector
    G10548884Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the Engine.
    Fig 2: Removing Installation Bolts And Coolant Hoses
    G10548885Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals