Repair Procedures: Installation

Install in the reverse order of removal.
1. Use a SST (09480-A3800) or 0.1969in. (5mm) bolt fix the inhibitor manual control lever in the N jig hole (A) when you assemble the inhibitor (B).
  
  Fig 1: Assembling Inhibitor Manual Control Lever In 'N' Jig Hole
  Courtesy of HYUNDAI MOTOR AMERICA
2. Adjust the shift cable after you install the inhibitor switch.
  (Refer to: Automatic Transaxle Control System - "SHIFT LEVER ").