Repair Procedures: Installation

Install in the reverse order of removal.
NOTE:
After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
- Adding Automatic Transaxle Fluid (ATF).
  (Refer to: Hydraulic System - "FLUID ").
- Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
  (Refer to: Automatic Transaxle Control System - "REPAIR PROCEDURES ").
- Use new valve body gasket (A).
  
  Fig 1: Replacing Valve Body Gasket
  Courtesy of HYUNDAI MOTOR AMERICA