Control Cable Replacement

Remove the center console assembly.
(Refer to: "Interior - CONSOLE " in BD procedure).
Remove the control cable (A).

Fig 1: Removing Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
Tightening Torque:

11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7 ~ 10.9 lb-ft)

Fig 2: Control Cable Assembly Nuts And Retainer
Courtesy of HYUNDAI MOTOR AMERICA
Remove the nut (C).
Tightening Torque:

9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)
Remove the cable (B) from the bracket (A) at transaxle assembly side (Refer to: "AUTOMATIC TRANSAXLE " in this procedure).

Fig 3: Removing Cable From Bracket Nut At Transaxle Assembly Side
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable inside of cab.