LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Santa Fe GLS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Heated Oxygen Sensor - HO2S >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    NOTE: Note that the SST (Part No.: 09392-2H100) is useful when removing the heated oxygen sensor.

    Bank 1/Sensor 1 

    Fig 1: Heated Oxygen Sensor - HO2S - Connector - Bank 1/Sensor 1
    G10574900Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Heated Oxygen Sensor - HO2S - Bank 1/Sensor 1
    G10574901Courtesy of HYUNDAI MOTOR AMERICA

    Bank 1/Sensor 2 

    Fig 3: Heated Oxygen Sensor - HO2S - Connector - Bank 1/Sensor 2
    G10574902Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Heated Oxygen Sensor - HO2S - Bank 1/Sensor 2
    G10574903Courtesy of HYUNDAI MOTOR AMERICA

    Bank 2/Sensor 1 

    Fig 5: Heated Oxygen Sensor - HO2S - Connector - Bank 2/Sensor 1
    G10574904Courtesy of HYUNDAI MOTOR AMERICA
    Fig 6: Heated Oxygen Sensor - HO2S - (Bank 2/Sensor 1
    G10574905Courtesy of HYUNDAI MOTOR AMERICA

    Bank 2/Sensor 2 

    Fig 7: Heated Oxygen Sensor - HO2S - Connector - Bank 2/Sensor 2
    G10574906Courtesy of HYUNDAI MOTOR AMERICA
    Fig 8: Heated Oxygen Sensor - HO2S - Bank 2/Sensor 2
    G10574907Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals