Repair procedures: Removal

CVVT Oil Control Valve - Intake 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the intake manifold.

   (Refer to "INTAKE MANIFOLD ")

3. Disconnect the CVVT oil control valve connector (A).
4. Remove the installation bolt (B), and then remove the valve from the engine.

   Bank 1 

   Fig 1: CVVT Oil Control Valve Connector And Installation Bolt - Bank 1

   Courtesy of HYUNDAI MOTOR AMERICA

   Bank 2 

   Fig 2: CVVT Oil Control Valve Connector And Installation Bolt - Bank 2

   Courtesy of HYUNDAI MOTOR AMERICA

CVVT Oil Control Valve - Exhaust 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the CVVT oil control valve connector (A).

   Bank 1 

   Fig 3: CVVT Oil Control Valve - Exhaust, Bank 1

   Courtesy of HYUNDAI MOTOR AMERICA

   Bank 2 

   Fig 4: CVVT Oil Control Valve - Exhaust, Bank 2

   Courtesy of HYUNDAI MOTOR AMERICA
3. Remove the cylinder head cover.

   (Refer to "CYLINDER HEAD COVER ")

4. Remove the installation bolt (A), and then remove the valve from the engine.

   Bank 1 

   Fig 5: CVVT Oil Control Valve Installation Bolt - Bank 1

   Courtesy of HYUNDAI MOTOR AMERICA

   Bank 2 

   Fig 6: CVVT Oil Control Valve Installation Bolt - Bank 2

   Courtesy of HYUNDAI MOTOR AMERICA