Repair procedures: Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the left air vent.

   (Refer to "CRASH PAD ")

3. Disconnect the connector (A).

   [LHD] 

   Fig 1: LHD Connector

   Courtesy of HYUNDAI MOTOR AMERICA

   [RHD] 

   Fig 2: RHD Connector

   Courtesy of HYUNDAI MOTOR AMERICA
4. Remove the start/stop button (A) after loosening the mounting screws.

[LHD] 

Fig 3: Removing Start/Stop Button Mounting Screws (LHD)

Courtesy of HYUNDAI MOTOR AMERICA

[RHD] 

Fig 4: Removing Start/Stop Button Mounting Screws (RHD)

Courtesy of HYUNDAI MOTOR AMERICA