LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Tucson GLS, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Identifying Accelerator Position Sensor Connector
    G10611513Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation nuts (B), the bolt (C) and then remove the accelerator pedal module.
Fig 2: Identifying Accelerator Pedal Module Installation Nuts
G10611514Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Identifying Accelerator Pedal Module Installation Bolt
G10611515Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals