Variant coding Procedure

■ On-Line type on GDS 

1. Ignition "OFF", connect GDS.
2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
3. Select Variant coding mode.
4. Follow steps on the screen as in illustrations below.

1. Initial ACU Variant Coding screen
   Fig 1: Display - Initial ACU Variant Coding Screen

   Courtesy of HYUNDAI MOTOR AMERICA
2. VIN Code entering screen
   Fig 2: Display - VIN Code Entering Screen

   Courtesy of HYUNDAI MOTOR AMERICA
3. Variant coding's proceeding screen-1
   Fig 3: Display - Variant Coding Proceeding Screen-1

   Courtesy of HYUNDAI MOTOR AMERICA
4. Variant coding's proceeding screen-2
   Fig 4: Display - Variant Coding Proceeding Screen-2

   Courtesy of HYUNDAI MOTOR AMERICA
5. Variant coding is completed
   Fig 5: Display - Variant Coding Completed Screen

   Courtesy of HYUNDAI MOTOR AMERICA

■ Off-line type on GDS (This can be used when not connecting to internet) 

1. Initial ACU Variant Coding screen
   Fig 8: Display - Initial ACU Variant Coding Screen

   Courtesy of HYUNDAI MOTOR AMERICA
2. ACU Coding Code entering screen
   Fig 9: Display - ACU Coding Code Entering Screen

   Courtesy of HYUNDAI MOTOR AMERICA
3. Screen of rechecking ACU Coding code's entering
   Fig 10: Display - ACU Coding Code Entering Rechecking Screen

   Courtesy of HYUNDAI MOTOR AMERICA
4. Variant coding's proceeding screen-1
   Fig 11: Display - Variant Coding Proceeding Screen-1

   Courtesy of HYUNDAI MOTOR AMERICA
5. Variant coding's proceeding screen-2
   Fig 12: Display - Variant Coding Proceeding Screen-2

   Courtesy of HYUNDAI MOTOR AMERICA
6. Variant coding is completed
   Fig 13: Display - Variant Coding Completed Screen

   Courtesy of HYUNDAI MOTOR AMERICA
   NOTE:

   1. This screen is opened when you try the variant coding again on the SRSCM which has been performed variant coding.
      Fig 14: Display - ACU Coding Completed Screen

      Courtesy of HYUNDAI MOTOR AMERICA