LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Button Engine Start System >> Start/Stop Button >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center garnish (A).
    Fig 1: Identifying Crash Pad Center Garnish
    G10751842Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the crash pad lower panel (A).
    Fig 2: Removing Crash Pad Lower Panel
    G10751843Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the steering column shroud lower and upper panel (A) after loosening 3 screws.
    Fig 3: Loosening Steering Column Shroud Lower And Upper Panel Screws
    G10751844Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Identifying Steering Column Shroud Lower And Upper Panel
    G10751845Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the driver crash pad panel (A).
    Fig 5: Identifying Driver Crash Pad Panel
    G10751846Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the Start/Stop button connector (A).
    Fig 6: Identifying Start/Stop Button Connector
    G10751847Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the Start/Stop button (A) after pushing the hook (B).
    Fig 7: Locating Start/Stop Button
    G10751848Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals