LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Identifying Crankshaft Position Sensor Connector
G10749870Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Identifying Crankshaft Position Sensor Bolt
G10749871Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals