Adjusting Method for T/M Control Cable

Make sure vehicle Does Not roll before setting room side shift lever and T/M side Manual Control Lever to "N" position.
Connect room side lever (A) and control cable (B).

Fig 1: Identifying Room Side Lever And Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Push cable to "F" direction displayed to eliminate FREE PLAY.
Tighten Adjusting Nut (A).
Tightening Torque:

9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

Fig 2: Tightening Adjusting Nut
Courtesy of HYUNDAI MOTOR AMERICA
After adjusting, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of room lever.