Repair Procedures: Removal

Remove the floor console assembly.
(Refer to: Body - "FLOOR CONSOLE ASSEMBLY ").
Remove the control cable (A).

Fig 1: Identifying Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the main crash pad.
(Refer to: Body - "MAIN CRASH PAD ASSEMBLY ").
Remove the heater unit.
(Refer to: Heater - "HEATER UNIT ").
Remove the retainer (A) and nuts (B).
Tightening Torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Fig 2: Identifying Retainer And Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the nut (C).
Tightening Torque:

9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)
Remove the cable (B) from the bracket (A) at transaxle assembly side.

Fig 3: Identifying Transaxle Assembly Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable inside of cab.