LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle Control System >> Control Cable >> Repair Procedures >> Adjustment >> Select Cable Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable Adjustment

  1. Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.
    Fig 1: Removing Select Cable Snap Pin
    G10750132Courtesy of HYUNDAI MOTOR AMERICA
  2. Shift the shift lever to 3rd gear.
  3. Move the slide clip (B) of guide member (A) in the direction as displayed in the graphic.
    Fig 2: Moving Slide Clip Of Guide Member
    G10750133Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the select cable (A).
    Fig 3: Installing Select Cable
    G10750134Courtesy of HYUNDAI MOTOR AMERICA
  5. Insert the slide clip (A) in the direction as displayed in the graphic and then install the snap pin (B).
    Fig 4: Inserting Slide Clip And Snap Pin
    G10750135Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals