LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Installation

  1. Install the power trunk module & drive unit.

    Tightening torque: 

    22 ~ 27 N.m (2.2 ~ 2.7 kgf.m, 15.9 ~ 19.5 lb-ft)

  2. Install the push rod to the ball joint.
  3. Connect the connector (18P).
  4. Install the left trunk trim.
  5. Connect the negative (-) battery terminal and check the power trunk module correctly.
    NOTE:
    • Connect the connectors tightly.
    • Check the power trunk lid for normal operation correctly.
    WARNING:
    • A lost drive unit mounting bolt in the vehicle may make a noise.
    • Don't operate the power trunk lid when a push rod is removed.
    • A learn cycle must be performed whenever the power is removed.
    • Check the normal operating whenever a power tailgate component is removed or replaced. If the chime sound is heard, check the DTC, wiring harness and cable connections.
scientia non olet · About LEMON Manuals