LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

CAUTION:
  • When removing and installing the trunk lid, an assistant is necessary.
  • Take care not to be closed the trunk when removing the push rod.
  • Wear gloves to protect hands from injury.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the left trunk trim in the trunk. (Refer to "TRUNK TRIM ")
  3. Remove the power trunk connecting rod (B) after removing the push rod pin (A).
    NOTE:
    • Only remove the gas lifter when removing the whole trunk assembly.
    Fig 1: Removing Push Rod Pin
    G10387337Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power trunk module & drive unit (A) after removing the bolts, nut and connector.
    Fig 2: Removing Power Trunk Module & Drive Unit
    G10387338Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals