LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Genesis 5.0 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Smart Cruise Control System - 3.8L) >> Smart Cruise Control Switch >> Repair procedures >> Inspection >> Measuring Resistance
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Measuring Resistance

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Cruise Control Switch Terminals
    G10452105Courtesy of HYUNDAI MOTOR AMERICA
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    Function switch Terminal Resistance (kΩ)
    SET - 5 - 6 0.31 ~ 0.35
    RES + 5 - 6 0.52 ~ 0.58
    SCC 5 - 6 2.42 ~ 2.67
    CANCEL 5 - 6 0.17 ~ 0.19
    CRUISE 5 - 6 0.84 ~ 0.92
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals