LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Genesis Coupe 3.8 R-Spec >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Electronic Throttle Control System - ETC >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air intake hose (Refer to "INTAKE AND EXHAUST SYSTEM (ENGINE MECHANICAL) - 3.8L " ).
  3. Disconnect the ETC module connector (A).
    Fig 1: ETC Module Connector
    G10493783Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts, and then remove the ETC module (C) from the engine.
    Fig 2: ETC Module And Coolant Hoses
    G10493784Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals