Repair procedures: Installation

Temporarily install the shift lever assembly with the base bracket and select rod.
CAUTION: Be careful not to damage to the shift lever assembly.
Install the mounting nuts (A-4ea) of shift lever assembly.

Fig 1: Shift Lever Assembly And Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Install the base bracket (C) and select rod (D) to the transmission with clips (A-2ea) and snap pin (B).

Fig 2: Base Bracket, Select Rod, Clips And Snap Pin
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Clip
Courtesy of HYUNDAI MOTOR AMERICA
Reassemble the propeller shaft to the transmission by installing the bolts (A-3ea).

Fig 4: Propeller Shaft Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Install the heat shield cover (A).

Fig 5: Heat Shield Cover
Courtesy of HYUNDAI MOTOR AMERICA
Install the muffler assembly.
(Refer to MUFFLER )
Zip the leather cover of shift lever.