LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Intake Solenoid - VIS - Valve >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B, C) from the valve.
  4. Remove the installation nut (D), and then remove the valve.

    Valve 1 - Intake manifold 

    Fig 1: Variable Intake Solenoid Valve Connector, Vacuum Hoses And Installation Nut - Valve 1, Intake Manifold
    G10574951Courtesy of HYUNDAI MOTOR AMERICA

    Valve 2 - Surge tank 

    Fig 2: Variable Intake Solenoid Valve Connector, Vacuum Hoses And Installation Nut - Valve 2, Surge Tank
    G10574952Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals