LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B).
  5. Remove the fuel tank air filter after removing the mounting nut (C).
    Fig 1: Disconnecting Ventilation Hose
    G11643711Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the pointer in the figure.
    Fig 2: Locating Canister Close Valve (CCV) Lever
    G11643712Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Locating Canister Close Valve (CCV)
    G11643713Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals