Repair Procedures: Removal
WARNING:
In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don't do any remedy work right after engine stops.
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Release the residual pressure in fuel line (Proceed to the Fuel Delivery System - Remedy Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE
").CAUTION: When removing the fuel pump fuse, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
- Remove the delivery pipe & injector assembly (Proceed to "DELIVERY PIPE " in this procedure).
- Remove the connector (A) and the fixing clip (B), and then separate the injector from the delivery pipe.