LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Knock Sensor (KS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Proceed to "INTAKE MANIFOLD " in EM procedure).
  3. Disconnect the knock sensor connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Locating Knock Sensor (KS) Connector And Installation Bolt
G11643659Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals