Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
Oil-pressure characteristics input (TCM exchange).

Fig 1: Scantool Display - Oil-Pressure Characteristics Input Procedure (1 Of 3)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Scantool Display - Oil-Pressure Characteristics Input Procedure (2 Of 3)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Scantool Display - Oil-Pressure Characteristics Input Procedure (3 Of 3)
Courtesy of HYUNDAI MOTOR AMERICA
Perform the procedures related in the ECM after replacing the TCM.
(Refer to ENGINE CONTROL MODULE (ECM) Engine Control/Fuel System )
Perform TCM learning after replacing the transaxle to prevent slow transaxle response, jerky acceleration and jerky startup. (Refer to Automatic Transaxle Control System - "Repair procedures ")