Repair Procedures: Removal
- Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
- Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)
- Remove the front wheel guard.
- Remove the front wheel speed sensor cable mounting bolt.
- Disconnect the front wheel speed sensor connector, then remove the front wheel speed sensor.
- Installation is the reverse of removal.