Repair Procedures: Removal

Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the canister assembly.
(Refer to Emission Control System - "CANISTER ")
Remove the installation bolt (A), and then remove the air filter (B).

Fig 1: Locating Air Filter And Installation Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figure.

Fig 2: Locating Lever
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Separating Canister Close Valve From Fuel Tank Air Filter
Courtesy of HYUNDAI MOTOR AMERICA
Install a new fuel tank air filter in accordance with the reverse order.