LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Elantra Limited >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.0L >> Inhibitor Switch >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Make sure vehicle does not roll before setting shift lever to "N" position.
  2. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  3. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  4. Disconnect the inhibitor switch connector (A).
  5. Remove the shift cable mounting nut (B).
    Fig 1: Locating Inhibitor Switch Connector And Shift Cable Mounting Nut
    G12025428Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the manual control lever and the washer after removing a nut (A).
  7. Remove the inhibitor switch after removing the bolts (B).
Fig 2: Locating Manual Control Lever/Washer And Inhibitor Switch Bolts
G12025429Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals