LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - 2.0L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the upper mounting cap (B), and then remove the mounting nut (C).
  4. Remove the lower mounting cap (D), and then remove the mounting nut (E).
Fig 1: Removing Upper Mounting Cap And Lower Mounting Cap
G12055438Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Disconnecting Accelerator Position Sensor Connector
G12055439Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals