Repair Procedures: Installation

1. Install in the reverse order of removal.
2. Adjust the alternator belt tension after installation.

(Refer to Engine Mechanical System - "DRIVE BELT ")

Alternator installation bolt: 

[12 mm (0.47 in) bolt]

19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

[14 mm (0.55 in) bolt]

29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 lb-ft)