LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L >> Input Shaft Speed Sensor 2 >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  2. Remove the battery and tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Remove the clutch actuator.

    (Refer to Dual Clutch Control System - "CLUTCH ACTUATOR ")

  4. Disconnect the input shaft speed sensor (A).
    Fig 1: Locating Input Shaft Speed Sensor
    G12039622Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the input shaft speed sensor after removing the bolt (A-2ea).
Fig 2: Locating Input Shaft Speed Sensor Bolts
G12039623Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Locating Input Shaft Speed Sensor 2
G12039624Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals