LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L >> Shift Cable >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  2. Remove the TCM.

    (Refer to Dual Clutch Transmission Control System - "TCM ")

  3. Remove the battery and tray.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Remove the shift cable (C) from the bracket (B) after loosening the nut (A).
    Fig 1: Locating Shift Cable, Bracket And Nut
    G12039660Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the shift lever knob & boots (A).
    Fig 2: Locating Shift Lever Knob & Boots
    G12039661Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ")

  7. Remove the air duct (A).
    Fig 3: Locating Air Duct
    G12039662Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the shift cable.
    1. Disconnect the cable holder (A) from the shift lever, after removing the snap pin (C).
    2. Disconnect the cable bracket (B) from the shift lever after pushing the lock.
    Fig 4: Locating Cable Bracket, Cable Holder And Snap Pin
    G12039663Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the retainer by loosening the nuts (A).
  10. Remove the shift cable from the vehicle.
Fig 5: Locating Retainer Nuts
G12039664Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals