Repair Procedures: Disassembly

1. Remove the plastic bracket (A) and then disconnect the "P" position switch.
   Fig 1: Locating Plastic Bracket

   Courtesy of HYUNDAI MOTOR AMERICA
2. Disconnect the shift lock solenoid (A).
   Fig 2: Locating Shift Lock Solenoid

   Courtesy of HYUNDAI MOTOR AMERICA
3. Disconnect the main connector (A) from the shift lever.
   Fig 3: Locating Main Connector

   Courtesy of HYUNDAI MOTOR AMERICA
4. Remove the mounting bracket (A) of terminals from the main connector.
   Fig 4: Locating Mounting Bracket Of Terminals

   Courtesy of HYUNDAI MOTOR AMERICA
5. Remove each terminals of the P position switch (A), shift lock solenoid (B) from the main connector (C).

Fig 5: Removing Terminals Of P Position Switch, Shift Lock Solenoid From Main Connector

Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Locating P Position Switch, Shift Lock Solenoid And Main Connector

Courtesy of HYUNDAI MOTOR AMERICA

Information 

1. Connector information

Fig 7: Shift Lever Connector Terminals

Courtesy of HYUNDAI MOTOR AMERICA

1. Shift lock solenoid (+)
2. Shift lock solenoid (-)
3. DCT sensor_IG 1
4. CAN (High)
5. CAN (Low)
6. DCT sensor_ground
7. "P" Position switch (-)
8. "P" Position switch (+)