LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Auto Lighting Control System >> Auto Light Sensor >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto light sensor (A) from crash pad upper side by using screw (-) driver.
    Fig 1: Removing Auto Light Sensor From Crash Pad Upper Side
    G12126566Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Apply the protective tapes to screw (-) driver tip.
  3. Remove the auto light connector.
scientia non olet · About LEMON Manuals