LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Locks >> Power Door Lock Module >> Repair Procedures >> Inspection >> Trunk Lock Module Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trunk Lock Module Inspection

  1. Remove the trunk lid trim.

    (Refer to Body - "TRUNK LID TRIM ")

  2. Disconnect the connector from the actuator
    Fig 1: Trunk Lock Module Connector Terminals
    G12023575Courtesy of HYUNDAI MOTOR AMERICA
  3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
    Fig 2: Trunk Lock Module Circuit Diagram
    G12023576Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Trunk Lock Module Terminals Description Chart
    G12023577Courtesy of HYUNDAI MOTOR AMERICA
  4. Checking the trunk of the vehicle power option power refers to the trunk module.