LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Santa Fe Sport 2.0T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the resonator and the air intake hose.

    (Refer to INTAKE AND EXHAUST SYSTEM - 2.0L )

  3. Remove the intercooler inlet pipe & hose assembly (A).
    Fig 1: Removing Intercooler Inlet Pipe & Hose Assembly
    G12055368Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the ETC module connector (A).
  5. Disconnect the coolant hoses (B).
  6. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 2: Disconnecting ETC Module Connector
G12055369Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals