LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Barometric Pressure Sensor (BPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the air cleaner assembly.
G12033993Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals