LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Injector Drive Box (IDB) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch off and disconnect the battery negative (-) cable.
  2. Remove the glove box housing.

    (Refer to "GLOVE BOX HOUSING ")

  3. Disconnect the injector drive box (IDB) connector (A).
    G12033982Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the IDB bracket assembly (A) after removing the bolt and nuts.
G12033983Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals