LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System - 2.0L) >> Engine Control Module (ECM) >> Repair Procedures >> Adjustment >> ECM Neutral Mode procedure >> If Installing A Used ECM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

If Installing A Used ECM

WARNING: This page is about a different variant/trim than selected.
  1. Perform "ECM NEUTRAL MODE" procedure using GDS.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")

  2. After finishing "ECM Neutral Mode", perform "KEY TEACHING " procedure using GDS.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")



  1. Perform "ECM NEUTRAL MODE" procedure using GDS.

    (Refer to Body Electrical System - "SMART KEY ")

  2. After finishing "ECM Neutral Mode", turn IGN ON then OFF using the smart key or start button. Then the ECM learns information on the smart key automatically.
scientia non olet · About LEMON Manuals