Repair Procedures: Replacement: Notes

CAUTION:

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Remove the rear seat cushion assembly.
(Refer to Rear Seat - "REAR SEAT ASSEMBLY ")
Remove the rear seat back assembly.
(Refer to Rear Seat - "REAR SEAT ASSEMBLY ")
Remove the rear door scuff trim.
(Refer to Interior Trim - "DOOR SCUFF TRIM ")
After loosening the mounting screws, then remove the partition center trim (A).
Remove the luggage covering mat (B).
Remove the rear transverse trim (C).
Remove the rear wheel house trim (D).
After loosening the mounting screws, remove the luggage side trim (E).
To install, reverse the removal procedure.
Information
- Replace any damaged clips.