LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Kona Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the canister assembly.

    (Refer to Emission Control System - "CANISTER ")

  3. Remove the canister protector (A) after loosening the mounting bolt & fastener.
    G12596725Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the canister cover (A) after loosening the mounting bolt & fastener.
    G12596726Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the clip, and then separate the fuel tank air filter (A) from the canister after rotating it in the direction of the arrow in the figure.
    G12596727Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the canister close valve extension wiring (A).
    G12596728Courtesy of HYUNDAI MOTOR AMERICA
  7. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figure.
    G12596729Courtesy of HYUNDAI MOTOR AMERICA
    G12596730Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals